Hello,my input signal is 3GHz and 0.3V i need my signal to be at least 0.7,so i built a common source amplifier by the principle of the schematics bellow.
as you can see,from my operating point simulation i have gm=10.48m my Rd=1K from the formula bellow A=gmRd ,so it needs to amplify my signal 10 times.
instead the signal is decreased as shown in the transient plot bellow.where did i go wrong?
maybe it's the output port putting impedance that i am not aware of?
Thanks
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.Image may be NSFW.
Clik here to view.
Clik here to view.
