Hi,
Hope you are doing fine. I have read the forum and the post Tawna made here: https://community.cadence.com/cadence_blogs_8/b/rf/posts/tip-of-the-week-how-to-simulate-a-subcircuit-netlist-with-spectre-in-ade
I tried to import the Spice model into the Cadence based on that instructions but I cannot follow from the third step as it is totally different in my Cadence version probably. But I got the idea from the instructions and created a spiceText cellview, then saved it and it automatically created the symbol for me based on the pins and terminals. Then I am trying to use this symbol in another schematic to do some SP analysis in schematic. But, at the very first point I get the error for creating the netlist, so do you have any suggestion how can I import this amplifier spice model into my library (I have also attached my CDF menu screen shot which is different from what is mentioned in the instructions by Tawna):
"generate netlist...
function ansCdlCompPrim redefined
function ansCdlCompPrim redefined
Begin Incremental Netlisting Mar 22 16:34:00 2021
ERROR (OSSHNL-116): Unable to descend into any of the views defined in the view list, 'spectre veriloga ahdl cmos_sch schematic', for the
instance 'I0' in cell 'PAD115_tb'. Add one of these views to the cell 'PAD115' in the
library 'Non_Foster_Circuit', or modify the view list so that it contains an existing view.
End netlisting Mar 22 16:34:00 2021
ERROR (OSSHNL-514): Netlist generation failed because of the errors reported above. The netlist might not have been generated at all, or the generated netlist could be corrupt. Fix the reported errors and regenerate the netlist.
...unsuccessful."
