I am using the ideal freq divider block from the rflib to troubleshoot my 100GHz PLL. I need to assign the parameters in the freq div block. My input frequency (coming from the VCO) is around 100GHz, and I need an output frequency of 100MHz - so I need a divide ratio of 1000. I have attached a screenshot of the parameters I have assigned in the freq divider block. These parameters are not correct since I am getting a 0 output out of the freq div block (see attached waveform). Please help me with assigning the parameters to my freq divider block (I am not sure what some of these parameters really mean, I am a student and still learning). I appreciate any help! Green is the output of my VCO and purple is the output of freq divider.
